Finding out that your bed frame is broken can be pretty frustrating. It doesn’t matter if you have a cheap or expensive bed; breaking can happen with any option. And we know that repairing broken frames might get costly. If you want to avoid the unexpected cost, it is better to fix the issue yourself. In this post, we share tips on how to fix a broken bed frame. When you go through them, you will repair the bed and save money!
How to fix a small crack
Why does the bed frame break? Poor structural support is the source of this problem. Even more expensive brands use cheap materials for constructing their beds. Therefore don’t be surprised if your high-end bed shows signs of cracking.
The bed frame will break as a result of not having enough support. However, you don’t need to splurge on a new bed just because a crack has appeared. Fixing a broken bed frame is simple and straightforward, even if you don’t have extensive experience with DIY projects and repairs. Despite setting the crack, you will need to reinforce the frame so that it provides enough support to bear the weight without cracking again. This crucial step will prevent damages in the future and save you money.
How to fix a broken bed frame and save money? Make sure to remove the matres and the debris to access the crack. You can quickly fix small cracks with putty. Before you apply it, make sure to work with an even surface. Use sandpaper to smoothen the surface to ensure the maximum efficiency of the glue. Collect the dust and debris before proceeding with the next step. The carpenter filler might not adhere properly when there is debris, so this step is crucial.
Apply the special carpenter filer over the crack and make sure to distribute it evenly with a proper tool such as a putty knife. Leave the putty to dry according to the instructions indicated on the package. This simple method will fix small cracks without the need for costly repairs.
How to fix a large crack
If you have a large crack, fixing it with putty won’t work. It would be best to use wood glue to fix this problem. Repeat the same process and prepare the wood by sanding it to get even edges. Also, collect the dust and debris to allow the glue to bind well. Distribute the wood glue evenly over the length and use a putty knife. Use clamps to secure the area and glue to attach the frame. Tighten the clamps and scrape the excess glue drips with your putty knife. Leave the glue to dry according to the instructions on the package. You can sand the surface to even out the glue when you finish. In addition, it would be best to reinforce the frame to prevent problems like this in the future.
How to reinforce a bed frame
When you are familiar with how to fix a broken bed frame, you should move on to the next step. As we already explained, cracks happen due to poor structural support. When you fix the cracks, it is crucial to address the root of this problem. You should identify why the bed frame is weak so that you know how to fix this issue.
Tighten the screws
One of the simplest ways to reinforce a bed frame is to tighten the screws. Loose parts will weaken the bed structure and eventually create cracks since there is no proper support for the weight. Check the frame screws and find any loose ones that need to be tightened.
Fix the loose joints
Another thing that can weaken the bed frame is loose joints. With constant wear and tear, the joints might become loose. Or, the wood might expand over time and loosen up.
The issue of loose joints often happens with older beds that are joined together with a slot. Use a hammer to bind the loose joints or use wood glue to stick them.
Update the center beam
With older beds, the center beam might be a problem. It won’t support the weight, resulting in a destabilized bed frame. If this is the case, you can replace the center beams with new ones. This simple fix will provide better support for the bed frame.
How to fix slats
In some cases, you might notice that the bed slats are broken. This problem can happen due to pressure from the weight and is relatively easy to fix. All you need to do is replace the broken piece. Start with removing the broken slat and see if there are other damaged pieces. Some slats might experience more pressure than others when the weight isn’t equally distributed.
Make sure to get the correct measurements of the slats. You need to make sure you get the thickness and width right so that the new slat supports the weight well. Head to your nearest home store and get a replacement for the broken slat. If the salt is too long to fit, you can always cut it to work. Next, you should stick and screw the new slot into place, and your bed is fixed.
Final thoughts
You don’t need to buy a new bed because your existing one has cracks. The broken bed frame can easily be fixed with supplies and tools you already have in our home. The process depends on whether the damage is small or big. To prevent this kind of issue from happening again in the future, you should pay attention to the structure’s integrity. A weakened bed frame won’t bear the weight properly so the weak spots might snap under pressure. Therefore, make sure to reinforce the bed frame following the steps we already explained. Understanding how to fix a broken bed frame and how to prevent it will save you from headaches and unwanted costs.